Cart
Articles 0
Products for the sum 0 PLN
Delivery
Total
Show checkout

TOYOTA Yaris Oil seal

Found: 1
Oil seal 17,00/32,00*7,20/7,20 scheme type 1PMA Toyota Yaris 00-05
Article number: F-00151
Condition New
In stock
23 PLN
28,29 PLN contains 23% VAT, does not include delivery costs

Oil seal for other models of TOYOTA

Spare parts for TOYOTA Yaris

Steering system for TOYOTA Yaris

Air conditioning for TOYOTA Yaris

Hybrids and electric cars for TOYOTA Yaris

Recently viewed products
265 PLN
326 PLN contains 23% VAT, does not include delivery costs
Air conditioner compressor BMW X5 F15 13-18, BMW X5 E70 07-13, BMW 5 F10-18 10-17
Article number: 64529216466 R
Condition Refurbished
In stock
765 PLN
941 PLN contains 23% VAT, does not include delivery costs
High-voltage battery fuse
Article number: 170M4416
Condition New
Out of stock
775 PLN
953 PLN contains 23% VAT, does not include delivery costs
Steering rack duster Ford Fiesta 09-17, Fiat Linea 07-18, Peugeot Bipper 08-17
Article number: 62 93 9237
Condition New
Out of stock
Steering rack with EPS Audi R8 15-
Article number: AU411.NL00.RT
Condition Refurbished
Out of stock

Seal Construction

Seals (sealing rings) of power steering are used to seal the steering rack housing in places where mobile steering control elements - rod or shaft - exit. On one side, the seal prevents the hydraulic system working fluid from leaking out, and on the other hand, it prevents moisture, dust, and dirt from penetrating inside. The seal ring's fitting density directly affects the performance and longevity of the rack as a whole.

The sealing ring, or cuff, consists of three surfaces: Internal. The most critical part, as the inner edge contacts moving surfaces. The inner edge must be made of elastic, but simultaneously dense material. Depending on the seal design, there can be one or several such edges. External. It sits in the steering rack housing. Can be smooth or ribbed. End. A flat part of the detail that helps the ring sit more tightly in the mechanism.

Diameter, thickness, and structural features of the sealing rings must precisely correspond to the dimensions and characteristics of the steering rack in which they are used.

Since power steering seals have to deal with a housing filled with hydraulic fluid, they must be made of oil and gasoline-resistant materials. Most often, butadiene-nitrile rubber is used for this purpose.

Types of Sealing Rings

Like other cuffs, power steering seals can be divided into two groups:

  • frameless;
  • with reinforcing frame.

The first type is structurally simpler. It is an elastic ring made of polymer, inside which a spring of twisted steel is placed. It ensures tight fitting of the seal's working edges to the surface.

Framed cuffs are reinforced with an external metal body to increase strength and rigidity. The external surface of such seals can be partially or completely covered with rubber, smooth or ribbed.

Why Choose Our Sealing Rings

The consequences of using low-quality power steering seals can be disproportionately large compared to the initial savings on this inexpensive gasket. Violation of the steering rack's tightness can cause expensive repairs. Therefore, sealing rings, like other car parts, are better bought from proven places. The STS.Parts store strictly monitors the quality of the parts it sells and offers only the best products at moderate prices.

Subscribe to news!