Cart
Articles 0
Products for the sum 0 PLN
Delivery
Total
Show checkout

Peugeot e-2008 GT: replacing swollen coolant hoses and fixing a leak

Peugeot e-2008 GT: replacing swollen coolant hoses and fixing a leak

A 2021 Peugeot e-2008 GT came to our shop with a coolant leak on the driver's side. The photo shows that the rubber coolant hoses are damaged and swollen.

This fault is not limited to this car. It is reported on early e-2008 models and on other Stellantis electric vehicles built on a related platform. We had the right hoses in stock, so there was no wait for delivery.

What the customer came with

What the customer wanted: Fix the coolant leak on the driver's side.

Symptoms

  • Coolant leak on the driver's side
  • Damaged and swollen rubber coolant hoses (visible in the photo)

Unit identification: Rubber coolant hoses

ManufacturerStellantis
Markings9827336380, 9827072280, Оригинальные номера: 9827072280, 9842629780, 9827336380, 9842658680
Fits modelsPeugeot e-2008 (P24), 2021

How it works

The cooling system of an electric vehicle carries heat away from the power components. Coolant flows through pipes and rubber hoses that connect the individual units. The hoses must stay flexible and sealed through changes in temperature and pressure.

Main components

  • Rubber hoses and pipes
  • Coolant
  • Clamps and quick-connect fittings
  • Expansion tank

About the model: Swollen rubber hoses and coolant leaks are seen on early-production Peugeot e-2008 models and on other Stellantis electric vehicles built on a related platform. We are still confirming the exact list of models.

Good to know: The cause of the rubber breaking down is still only our hypothesis. We are not claiming that the factory coolant is chemically aggressive.

Step-by-step workflow

Click a photo to view it in full.

  1. Step 1 of 4

    Scanner diagnostics and cooling system inspection

    We connected an Autel MaxiSys MS909&EV scanner and checked 35 vehicle systems. This gives us the overall condition of the electronic control units and makes sure we don't miss related faults.

    At the same time, we inspected the cooling system on the driver's side and documented the condition of the hoses.

    • Full scan of 35 systems
    • Traction battery with no errors
    • Visual inspection of the hoses

    Tools: Autel MaxiSys MS909&EV

    The scanner report for 35 systems shows the condition of the vehicle's electronic control units.
  2. Step 2 of 4

    Documenting the damaged hoses

    We photographed the swollen and damaged rubber hoses and their position in the car. These photos show why the system lost its seal.

    • Swollen rubber
    • Coolant leak on the driver's side
    The damaged hose explains why the cooling system lost its seal.
  3. Step 3 of 4

    Replacing the hoses with new OEM ones

    We removed the damaged hoses and fitted new OEM ones. The parts were in stock at our shop, so the repair didn't drag on for months of waiting.

    • New OEM hoses
    • Parts available from stock

    Why this way: We don't repair swollen rubber that has lost its properties, we replace it: the seal of such a hose will fail again over time.

    Peugeot e-2008 cooling system before hose replacement Peugeot e-2008 cooling system after new hoses were fitted Before After
    Condition of the assembly before the hoses were replaced.
  4. Step 4 of 4

    Refilling with suitable coolant

    After the replacement, we used a coolant that meets the system's requirements.

    • Coolant to the cooling system specification

Parts and materials

  • Cooling system hose Stellantis 9827336380 New OEM
  • Cooling system hose Stellantis 9827072280 New OEM
  • Coolant that meets the system's requirements Material

Repair results

  • The damaged hoses were replaced with new OEM ones.
  • The system was refilled with coolant that meets the requirements.
  • The repair took 2 days.

A coolant leak on a Peugeot e-2008 can start with a swollen rubber hose. It needs to be replaced quickly, before the leak affects the operation of the power components.

We specialize in repairing Stellantis electric vehicles. We work with cooling systems for high-voltage components, OBC onboard chargers, high-voltage batteries and electronics.

Owner tips

How to prevent the failure

  • Inspect the hoses and connection points regularly. Check for swelling, cracks and signs of fluid.
  • Monitor the coolant level in the expansion tank.
  • Use the coolant that the manufacturer specifies for your system.
  • If you see drips or a falling coolant level, don't put off diagnostics: losing coolant can lead to overheating of the power components.

Repair or replace

  • We replace a swollen or damaged hose with a new one rather than repairing it.
  • We select OEM parts by part number. Before ordering, we check compatibility with your model.

Is your Peugeot e-2008 or another Stellantis electric vehicle losing coolant, or do the hoses look swollen?

At STS.Electro in Warsaw, we'll check the cooling system, select OEM hoses by part number and replace them. We have the parts you need in stock.

Other cases

Subscribe to news!