Cart
Articles 0
Products for the sum 0 PLN
Delivery
Total
Show checkout

TOYOTA Corolla Oil seal

Found: 1

Oil seal for other models of TOYOTA

Spare parts for TOYOTA Corolla

Steering system for TOYOTA Corolla

Air conditioning for TOYOTA Corolla

Hybrids and electric cars for TOYOTA Corolla

Recently viewed products
Disposable metal clamp 19,40/22,60/7,00
Article number: 99938756
Condition New
Out of stock
Steering Rack with HPS Peugeot 206 98-12
Article number: PE203R
Condition Refurbished
In stock
784 PLN
964 PLN contains 23% VAT, does not include delivery costs
Turbine VW Caddy III 04-15, Audi A3 03-12, Skoda Octavia A5 04-13
Article number: 03F145701T
Condition Refurbished
Out of stock
Steering rack with EPS Mercedes-Benz S-Class W223 20-
Article number: ME422.NLA0.RT
Condition Refurbished
Out of stock
Hydraulic power steering pump Suzuki Grand Vitara 98-05
Article number: SZ009R
Condition Refurbished
Out of stock
Turbine Opel Insignia 17-22, Opel Astra J 10-15, Opel Insignia 08-16
Article number: 54389700013
Condition Refurbished
Out of stock
Steering rack with EPS Peugeot 208 19-, Opel Corsa F 19-, DS 3 Crossback 18-
Article number: PE403.NLF0.R
Condition Refurbished
In stock
1 707 PLN
2 100 PLN contains 23% VAT, does not include delivery costs
Steering rack without steering gear Ford Escape 07-12
Article number: FO115R
Condition Refurbished
Out of stock

Seal Construction

Seals (sealing rings) of power steering are used to seal the steering rack housing in places where mobile steering control elements - rod or shaft - exit. On one side, the seal prevents the hydraulic system working fluid from leaking out, and on the other hand, it prevents moisture, dust, and dirt from penetrating inside. The seal ring's fitting density directly affects the performance and longevity of the rack as a whole.

The sealing ring, or cuff, consists of three surfaces: Internal. The most critical part, as the inner edge contacts moving surfaces. The inner edge must be made of elastic, but simultaneously dense material. Depending on the seal design, there can be one or several such edges. External. It sits in the steering rack housing. Can be smooth or ribbed. End. A flat part of the detail that helps the ring sit more tightly in the mechanism.

Diameter, thickness, and structural features of the sealing rings must precisely correspond to the dimensions and characteristics of the steering rack in which they are used.

Since power steering seals have to deal with a housing filled with hydraulic fluid, they must be made of oil and gasoline-resistant materials. Most often, butadiene-nitrile rubber is used for this purpose.

Types of Sealing Rings

Like other cuffs, power steering seals can be divided into two groups:

  • frameless;
  • with reinforcing frame.

The first type is structurally simpler. It is an elastic ring made of polymer, inside which a spring of twisted steel is placed. It ensures tight fitting of the seal's working edges to the surface.

Framed cuffs are reinforced with an external metal body to increase strength and rigidity. The external surface of such seals can be partially or completely covered with rubber, smooth or ribbed.

Why Choose Our Sealing Rings

The consequences of using low-quality power steering seals can be disproportionately large compared to the initial savings on this inexpensive gasket. Violation of the steering rack's tightness can cause expensive repairs. Therefore, sealing rings, like other car parts, are better bought from proven places. The STS.Parts store strictly monitors the quality of the parts it sells and offers only the best products at moderate prices.

Subscribe to news!